StonePro Color Enhancer
StonePro Color Enhancer Wet Look Penetrating Sealer – Matte Finish for Natural Stone
StonePro Color Enhancer Wet Look Penetrating Sealer is the ultimate solution for bringing out the vibrancy and depth of unpolished natural stone surfaces. This advanced, UV-stable formula intensifies color while creating a matte-finish wet look that enhances without adding artificial shine. Whether you’re treating honed, flamed, sandblasted, or unpolished stone, slate, brick, or concrete, this sealer deepens tones, enriches textures, and provides long-lasting protection.
Bring out the natural color and depth of unpolished stone with StonePro Color Enhancer. This penetrating, UV-stable sealer creates a rich, matte-finish wet look without adding a glossy or artificial sheen. It is suitable for honed, flamed, sandblasted, and other unpolished surfaces, including natural stone, slate, brick, pavers, and concrete.
Key Features and Benefits
- Enhances color and depth: Deepens the natural tones and textures of stone and masonry surfaces.
- Matte wet-look finish: Creates a richer appearance without producing a high-gloss sheen.
- Penetrating, UV-stable formula: Designed to resist yellowing and deterioration caused by sunlight exposure.
- Suitable for multiple surfaces: Use on honed, flamed, sandblasted, and unpolished stone, as well as slate, brick, pavers, and concrete.
- Stain and moisture protection: Helps protect treated surfaces from oil, water, and everyday environmental exposure.
- Simple application: Apply with a brush, roller, or sprayer.
- VOC compliant: Suitable for qualifying indoor and outdoor applications when used according to the manufacturer’s directions.
Coverage and Availability
- Available sizes: Quart and gallon
- Estimated coverage: 200–600 square feet per gallon, depending on surface porosity
- Full cure time: Approximately 24–72 hours, depending on conditions and application
How to Use
1. Apply Evenly
Generously apply an even coat to the surface using a brush, roller, or sprayer. Distribute the product evenly to support full penetration.
2. Allow the Sealer to Penetrate
Allow the sealer to absorb into the surface for approximately 3–5 minutes.
3. Reapply to Dry Areas
Check the surface after approximately three minutes. Apply additional sealer to areas that appear to be drying more quickly.
4. Remove Excess Product
After approximately five minutes, wipe the surface with a clean, dry microfiber cloth to remove any excess product.
5. Apply an Additional Coat if Needed
For deeper color enhancement, apply a second coat using the same process. Remove any remaining residue after each application.
6. Allow the Surface to Cure
Avoid moisture contact for 3–5 hours and keep the surface free from foot traffic for at least 12 hours. Full repellency may take 24–72 hours to develop.
Important: Always test the product in a small, inconspicuous area before treating the entire surface. Follow the instructions and safety information printed on the manufacturer’s label.
More Details
