StonePro EMP Easy Marble Polish Powder
StonePro EMP Easy Marble Polish Powder
Restore gloss to polished marble fast. StonePro EMP Easy Marble Polish Powder is a professional-grade marble polishing powder designed to improve shine and reduce common surface issues like etch marks, dullness, and light wear—without harsh sanding when used as directed.
Why Pros Use It
- Won’t etch or burn the surface when used as directed (built for sensitive stones).
- High coverage: approximately 200–400 sq ft per lb (depends on stone condition and technique).
- Boosts reflectivity for a cleaner, brighter finish.
- Helps harden the surface after polishing to improve durability.
- Safe around granite inlays (designed not to scratch/damage them).
- Use on floors, countertops, and walls with polished marble surfaces.
Ideal For
- Marble countertops, floors, and vanities that look dull or worn.
- Reducing etch marks and water stains on polished marble.
- Homeowners + contractors who want pro-looking results with straightforward steps.
- Routine marble maintenance to keep polished surfaces looking sharp.
- Residential and commercial spaces (homes, hotels, offices, etc.).
How to Use
This listing is EMP powder. Follow its current container directions for powder quantity and water preparation before polishing.
Step 1: Protect adjacent areas
Mask surrounding areas that will not be polished.
Step 2: Clean the stone
Remove dirt, dust, coatings, wax, grease and soil.
Step 3: Prepare damaged stone
Where damage requires it, use suitable diamond pads to restore clarity before EMP polishing.
Step 4: Work in sections
Limit each working area to approximately 12–16 square feet.
Step 5: Prepare the powder
Use the current EMP powder label’s preparation and dosing instructions.
Step 6: Polish
Use a 175 RPM swing machine with a hog’s-hair or white pad. Make 7–10 passes, approximately 4–5 minutes.
Step 7: Inspect
During polishing, after 6–8 passes, squeegee the slurry aside. If necessary, make another 2–4 passes and inspect again.
Step 8: Remove residue
Add water to loosen the slurry, then use a wet/dry vacuum with a rubber-bottomed nozzle. After polishing, clean remaining residue with a white pad and rinse.
StonePro references: Product information · Product information sheet. Follow the current container label for your product and size.