What factors should I consider when choosing a trowel size for tile installation?

One of the most crucial aspects of tile installation is choosing the right trowel size. Various factors such as the shapes and sizes of the trowels, the types of notches, and the tile size and placement should be considered.

What is the importance of the tile placement in selecting the trowel size?

Tile placement significantly affects the trowel size selection. For instance, if you're laying tiles on the floor, the mortar bed needs to be thicker to withstand foot traffic. Likewise, if the surface you're laying tiles on slopes a bit, you would need to back-butter or spread out your mud-bed slightly thicker.

What is the general guide to the size of trowel based on the tile size and placement?

Here is a general guide to the size of trowel to use based on the tile size and placement: 3/16″ to 1/4″ V-notch: Mosaics tiles up to 4-1/2″ glazed wall tile. 1/4″ x 1/4″ U or Square notch: 4″ to 8″ tile. 1/4″ x 3/8″ U or Square notch: 8″ to 16″ tiles. 1/2″ x 1/2″ U or Square notch: 16″ and larger.

What are the different types of notches, and how do they affect tile installation?

There are three primary types of notches - V-shape, U-shape, and square-notch. V-shape spreads less thinset than the same-sized square-notch, while the U-notch spreads out more than the v-notch but less than the square-notch. The major difference is how the thinset lies, affecting tile adhesion. Choosing the right trowel size is crucial for successful tile installation. The trowel size should match the tile size, and the type of notch you use will affect the concentration level of thinset. Also, consider the placement of the tiles and the surface you'll be laying them on to determine the appropriate trowel size.

What should I keep in mind for a successful tile installation?

To really understand which trowel type to use, and how to properly use it, watch the video provided. Keep in mind that choosing the right trowel size is crucial for a successful tile installation. The trowel size should match the tile size, and the type of notch you use will affect the concentration level of thinset. Also, consider the placement of the tiles and the surface you'll be laying them on to determine the appropriate trowel size.

NobleSeal® TS Thin-Bed Waterproofing

SKU SHTS186R

by Noble

$1,127.00 - $1,127.00

$1,127.00

$1,127.00 - $1,127.00

$1,127.00

NobleSeal TS Thin-Bed Waterproofing Membrane

Use in interior applications of ceramic and stone tile, both horizontal and vertical surfaces, over common substrate. Thin-set shower waterproofing, steam rooms, fountains, pools and planters. Also wet areas in shopping centers, food courts, hotel, condominiums, supermarket, prisons, health clubs, military and university housing and malls.

Features

Max continuous sheet size is 100 linear feet

Provides waterproofing and crack isolation/joint bridging for thin-set installations of ceramic and stone tile

Suitable for Thin-Bed Shower Waterproofing

Best Moisture/Vapor Barrier

Protects Thin-Set Tile from Cracking

Use Over Common Substrates including concrete, many plywood sub floors, radiant heat and primed gypsum underlayment

Best moisture / vapor barrier, 0.050 perms

Rated "extra heavy" by Robinson, test (ASTM C 627)

Guaranteed not to rot, crack or deteriorate

Ensures uniform thickness and quality

Minimizes workmanship variables

No curing install tile immediately

Bond with NobleBond EXT for fast cure time, can also be bonded with latex modified thin-set

How to specify

Specify in division 9 where required, provide NobeSeal TS, a composite sheet membrane manufactured from Chlorinated Polyethylene (CPE), with polyester fabric to both sides

Nominal thickness of 0.8mm (.030")

Bonded Waterproof Tiled Shower Assemblies/Sealed Systems

Bonded waterproof membranes, are glued to the substrate and allow for the direct application of tile

These membranes include sheet-applied products, which are bonded to the substrate with thin-set mortar or other adhesives, and trowel-applied products, which are spread over the substrate and allowed to dry/cure

Noble trowel applied membrane incorporate reinforcing mesh over the entire surface

Nobleseal TS allow the installer to produce a sealed system, in contrast to the shower pan liner

In general, the process begins with the installation of a sloped mortar base on the sub-floor and solid backing on the walls

Install NobleSeal TS on top of the mortar bed, backing and tie into the drain

Tile over the membrane using thin-set mortar

Finished assembly does not permit moisture penetration into the solid backing or mortar bed, allowing the assembly to dry completely between uses and eliminating the potential for mold growth in the system

NobleSeal® TS Thin-Bed Waterproofing

NobleSeal TS Thin-Bed Waterproofing Membrane

Features

How to specify

Bonded Waterproof Tiled Shower Assemblies/Sealed Systems

QUESTIONS & ANSWERS

Have a Question?

Added to your cart: