Rockstar Miracle Clean
Rockstar Miracle Cleaner ā Heavy-Duty Degreaser & Stain Remover for Stone & Concrete
Rockstar Miracle Cleaner is a professional-strength degreaser and graffiti remover formulated for natural stone, concrete, tile, and other hard surfaces. Powered by a citrus-based solvent system, it tackles the most stubborn oil, grease, grime, and graffiti without the harsh fumes of traditional industrial cleaners. From food prep areas and warehouse floors to driveways and pavers, Rockstar Miracle Cleaner restores surfaces with commercial-grade results and safer application.
Key Features & Benefits of Rockstar Miracle Cleaner
-
Breaks Down Tough Grease & Oil
Penetrates deep-set grime, fat, and buildup on stone, concrete, tile, and masonry. -
Graffiti Removal Support
Enhances cleanup of treated surfaces when paired with Rockstar Anti-Graffiti Coating. -
Heavy-Duty Performance
Designed for high-impact commercial and industrial environments. -
Citrus-Based Solvent Formula
Safer than harsh chemical alternatives with reduced odor and toxicity. -
Flexible Application
Use full strength for stubborn stains or dilute for general-purpose cleaning. -
Safe for Multiple Surfaces
Works on stone, concrete, tile, grout, and outdoor pavers. -
Rinse with Rockstar Neutral Cleaner
Follow up with a neutral pH rinse to eliminate residue and rebalance surfaces.
Where to Use Rockstar Miracle Cleaner
-
Commercial Kitchens ā Cleans grease buildup from prep surfaces and floors
-
Warehouses & Loading Docks ā Removes dirt, oils, and industrial grime
-
Driveways & Garages ā Lifts motor oil, brake fluid, and tire stains
-
Concrete Pavers & Walkways ā Revives outdoor hardscapes from pollution and wear
-
Retail & Entryways ā Keeps high-traffic areas clean and professional
-
Graffiti Cleanup ā Assists removal of ink, paint, and marker from protected stone surfaces
How to Use
Ā
Always wear protective gloves and safety goggles when handling Rockstar Lift Off.
Test on an inconspicuous area to determine suitability for your surface.
Thoroughly wet the surface with clean water before application to prevent excessive penetration.
Mix with up to 4 parts water, depending on the level of cleaning required.
Apply the solution and let it sit for 3-5 minutes. Use a doodle bug scrubber, mop, or buffing machine to agitate the surface.
Use a wet vacuum, mop, or hose to remove slurry and residual solution. Rinse with clean water to neutralize the surface.
Ā
Precautions & Storage
ā Avoid skin and eye contact ā Always wear protective gloves and eyewear.
ā Use in well-ventilated areas and store in a cool, dry place.
ā Do not allow residue to dry on surfaces ā Always rinse thoroughly.
ā Keep away from heat sources and out of reach of children.
More Details